Bosch 6000 Installation Manual download pdf (Page 83)

8-1

Bosch Security Systems 10/12 BLCC600BI



SECTION 8

Output Programming

he Solution 144 is capable of controlling up to 16

outputs. The first 4 outputs are on the main control

board and an additional 4 outputs are provided using an

output expander module. Each output can have its own

unique name up to 16 characters to identify it on the

system for display and reporting purposes.

Under the commands menu you are able to view the

status of any output and to change its on/off condition. In

the case of latching output types, you will be required to

reset the output manually using these commands.

Outputs are programmed using an event type. First select

the event type that will cause the output to trigger. Then

select the polarity of the event, if it is low and goes high or

high and goes low. If the event is pulsing or one shot type,

the time parameter must also be programmed to define

the time of the pulse.

Event Assignment, this is extremely important parameter

and has a different meaning depending on the event type

selected. For example, event type “24 - Area Part On” the

event assignment selects the Area that is armed in part on

for the output to trigger. If you set the event assignment

to 1, then it will correspond to area 1 and so on, setting

it to zero means all areas. See the event type table for

more detail on the relationship of event type to event

assignment.

Outputs 1 and 2 are special outputs that can be configured

as horn speaker polarity types and are monitored to

report a device connection trouble. Output 4 is a dry

relay contact which has a optional jumper that allows you

to switch positive or negative without the need to add

additional wiring.

The outputs are all protected and will shut down

individually under overload conditions. A report will be

generated and a displayed on the keypad to indicate the

trouble condition.

OUTPUT COMMANDS

Outputs > Commands >

Output Status









MENU 4-0-0

This command allows you to view the current status of

any system output.

1) Press [MENU] + [4] + [0] + [0] and select the output

you want to view from the list then press [OK].

Alternatively, you can directly enter the output

number that you want to view then press [OK].

The keypad will display the following when the output

is currently in the OFF state and ready to activate.

External Siren Op1

Is OFF and Ready

Press OK or MENU

The keypad will display the following when the output

is currently in the OFF state but the connection is

missing.

External Siren Op1

Is OFF and Ready

Connection Trouble

Press OK or MENU

The keypad will display the following when the output

is currently in the ON state and ready.

External Siren Op1

Is ON and TIMING

Triggered

Press OK or MENU

The keypad will display the following when the

output is currently in the ON state but the connection

is missing.

External Siren Op1

Is ON and TIMING

Connection Trouble

Press OK or MENU

2) Press [OK] or [MENU] to exit.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 169 170

Comments to this Manuals

No comments

Bosch 6000 Installation Manual Page 83

Comments to this Manuals

Related products and manuals for Coffee grinders Bosch 6000