Bosch 6000 Installation Manual download pdf (Page 61)

Solution-144



Installation Manual  Area Programming

6-7

Bosch Security Systems 10/12 BLCC600BI

Keyswitch On/Off

When selected, the panel will activate the strobe

output for six seconds when a user turns the area on

via a keyswitch zone or the programmable input. This

provides silent feedback to the user that the signal has

been received when turning the area on or oﬀ.

24Hr Alarm

When selected, the panel will activate the strobe output

when a zone programmed as 24-hour (audible or silent)

has registered an alarm. Zones programmed as 24-Hour

Hold-Up are not included.

Areas > Area Properties >

Part Mode 1 Name





MENU 2-1-6

P a r t 1 A r e a 1 N a m e

This menu allows you to program the name for each area

when turning the area Part On or Part 2 On. Each area

name can be programmed with up to 20 characters. At

factory default, only Area 1 is used. The control panel can

have a maximum of 8 independent areas programmed.

1) Enter [MENU] + [2] + [1] + [6] and select the area

from the list and press [OK].

Part Mode 1 Name A1

Part 1 Area 1 Name

Press  OK to SAVE

2) Use the arrow and number keys to move and

change text. When the area name is complete,

press [OK]. At any time you can press the [OFF] key

to clear the text from the current cursor position to

the end of the line.

Note

See Alpha Text section in Section 4 - Programming

Overview for further detail on entering alpha text.

Areas > Area Properties >

Part Mode 2 Name





MENU 2-1-7

P a r t 2 A r e a 1 N a m e

This menu allows you to program the name for each area

when turning the area Part On or Part 2 On. Each area

name can be programmed with up to 20 characters. At

factory default, only Area 1 is used. The control panel can

have a maximum of 8 independent areas programmed.

1) Enter [MENU] + [2] + [1] + [6] and select the area

from the list and press [OK].

Part Mode 2 Name A1

Part 2 Area 1 Name

Press  OK to SAVE

2) Use the arrow and number keys to move and

change text. When the area name is complete,

press [OK]. At any time you can press the [OFF] key

to clear the text from the current cursor position to

the end of the line.

Note

See Alpha Text section in Section 4 - Programming

Overview for further detail on entering alpha text.

Areas > Area Properties >

Auto Arming





MENU 2-1-8

0 0

00 - Disabled

01 - 24 Hour TimeZone 09 - TimeZone 9 Name

02 - TimeZone 2 Name 10 - TimeZone 10 Name

03 - TimeZone 3 Name 11 - TimeZone 11 Name

04 - TimeZone 4 Name 12 - TimeZone 12 Name

05 - TimeZone 5 Name 13 - TimeZone 13 Name

06 - TimeZone 6 Name 14 - TimeZone 14 Name

07 - TimeZone 7 Name 15 - TimeZone 15 Name

08 - TimeZone 8 Name 16 - TimeZone 16 Name

This menu allows you to assign which time zone the area

will follow to automatically turn the area All On and/or

off (disarm). Only one time zone can be assigned to each

area.

1) Enter [MENU] + [2] + [1] + [8] and select the area

from the list and press [OK].

Auto Arming A1

00 - Disabled

Press  0-9 OK to SAVE

2) Use the arrow and number keys to select the time

zone that you want the area to follow, then press

[OK] to save and exit.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 169 170

Comments to this Manuals

No comments

Bosch 6000 Installation Manual Page 61

Comments to this Manuals

Related products and manuals for Coffee grinders Bosch 6000