Bosch 6000 Installation Manual download pdf (Page 159)

12-1

Bosch Security Systems 10/12 BLCC600BI



SECTION 12

Programming Examples

his section includes a number of programming

examples detailling how to implement some common

installation functionality.

Examples are provided to show;

 How to Open a Garage Door using a Single Digit

Code.

 How to Open a Garage Door using a 4 Button Keyfob.

 How to set Auto Arming for an Area.

 How to operate an Output using a Schedule

 How to Use a Reader to Unlock a Door.

 How to Use a Reader to Unlock a Door and Disarm

Area 1.

 How to Use a Reader to Unlock a Door and Arm/

Disarm.

 How to use Call Line Identiﬁcation.

 How to send SMS Reports.

Opening a Door using a Single Digit Code

The control panel can be used to operate an electrically

controlled door using a single digit code. The example

assumes User 10 and Output 5 are being used. (Output 5

is located on the CM710B Output Expander).

Procedure

1) Set user PIN Length in MENU 1-5-0 = 00

(00 = Variable)

2) Set user 10 PIN in MENU 1-1-2 = 5

3) Set user 10 Area Assignment in MENU 1-4-1 = 0

4) Set Output 5 - Event Type in MENU 4-1-1 = 56

(56 = Follow Pin)

5) Set Output 5 - Event Assignment in MENU 4-1-2 =

10 (10 =User Number)

6) Set Output 5 - Output Polarity in MENU 4-1-3 = 04

(04 = Open 1 Shot Low)

7) Set Output 5 - Time Parameter MENU 4-1-4 = 000

000 005 000 (5 seconds)

8) Enable Output 5 - Output Options MENU 4-1-5 =

Display Status Message

Wire Output 5 to the appropriate Door Controller input.

Each time button [5] + [OK] on the keypad is pressed the

door will activate.

Opening a Garage Door Using a 4 Button RF Keyfob

The following example show how to configure the control

panel to allow control of a grage door as well as arm and

disarm functions using a 4 Button Keyfob. The example

assumes User 10 and Output 5 are being used. (Output 5

is located on the CM710B Output Expander).

Procedure

1) Set RF Receiver Type in MENU 3-5-0 = 04 - Bosch

Serial Rcvr

2) Assign Keyfob to User 10 in MENU 1-3-0

3) Set Output 5 - Event Type in MENU 4-1-1 = 54

(54 = RF Keyfob Function 2)

4) Set Output 5 - Event Assignment in MENU 4-1-2 =

01 (01 =Security System)

5) Set Output 5 - Output Polarity in MENU 4-1-3 = 4

(04 = Open 1 Shot Low)

6) Set Output 5 - Time Parameter in MENU 4-1-4 = 000

000 005 000 (5 seconds)

7) Enable Output 5 - Output Options in MENU 4-1-5 =

Display Status Message.

Auto Arming an Area

The control panel can be configured to automatically arm

and or disarm an area automatically if required.

Procedure

To setup an Auto Arming time, select a timezone that is

not being used, and program the timezone name in MENU

7-5-0 to something convenient.

Set the timezone period start time in MENU 7-5-1 for the

arming time you require. The stop time should be set to

12:00am or --:--am, which prevents the system from auto

disarming.

Set the timezone period day in MENU 7-5-2 for the days of

the week you require the area to automatically arm.

Set the timezone that you want the area to follow in MENU

2-1-8.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 169 170

Comments to this Manuals

No comments

Bosch 6000 Installation Manual Page 159

Comments to this Manuals

Related products and manuals for Coffee grinders Bosch 6000