Bosch 6000 Installation Manual Page 34
- Page / 170
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Solution-144
Installation Manual Programming Overview
4-4
Bosch Security Systems 10/12 BLCC600BI
ZONE ARRAY
The feature allows you to view the condition of all zones
on the panel in banks of 16 zones at a time. From the
installer programing mode press MENU 3-0-1 to access
the zone array.
Use the [] and [] arrow keys to scroll up and down the
zone banks and press [OK] or [MENU] when finished.
The following information can be displayed depending
on the current zone status.
N= NORMAL
S = SHORTED
A= ALARM
T= TAMPER
- = DISABLED
0000000001111111
1234567890123456
NSA-ANAT--------
Press
OK or MENU
In the above example screen,
N = Zone 01 and 06 are Normal (Sealed)
S = Zone 02 is Shorted
A = Zone 03,05,07 are in Alarm (Unsealed)
T = Zone 08 is in Tamper Alarm (Unsealed)
- = Zone 04, 09-16 are Disabled (Unused)
OUTPUT ARRAY
This feature allows you to view output status in groups of
16. From the installer programing mode press MENU 4-0-
2 to access the output array.
Use the [] and [] arrow keys to scroll up and down the
output banks and press [OK] or [MENU] when finished.
The following information can be displayed depending
on the current zone status.
N = NORMAL - Off Condition
T = TRIGGERED - On Condition
F = FAULT - Overload Condition
- = DISABLED
1) Enter [MENU] + [4] + [0] + [2] and use the up and
down arrows to select the output group to view.
2) Use the up and down arrows at any time to move to
a new group. The keypad will display the following
output array information for outputs 1 to 16.
0000000001111111
1234567890123456
NNNNN---TF------
Press OK or MENU
In the above example screen,
N = Outputs 01 to 05 are Normal (Off )
F = Output 10 has a Fault (Overload)
T = Output 09 is Triggered (On)
- = Outputs 05 to 08 and Outputs 11 to 16 are
Disabled or Not Available
DOOR ARRAY
This feature allows you to view door status in groups of 16.
From the installer programing mode press MENU 4-0-4 to
access the output array.
Press [OK] or [MENU] when finished.
The following information can be displayed depending
on the current zone status.
L = Door Locked
U = Door Unlocked
O = Override
- = Disabled or Not Available
0000000001111111
1234567890123456
LLLLL---UUUUO---
Press OK or MENU
In the above example screen,
L = Doors 01 to 05 are Locked
O = Door 13 has a Override condition
U = Doors 09 to 12 area Unlocked
- = Doors 06 to 08 and Doors 14 to 16 are Disabled or
Not Available
TESTING THE SYSTEM
You will need to be in programming mode before
accessing the test functions listed below.
Walk Test
Use the walk test command MENU 3-9-0 to test and verify
that all zones work correctly.
External Audible Test
Use MENU 4-9-0 to test and verify that all horn speakers
operate. This test will sound the horn speaker for two
seconds.
Internal Audible Test
Use MENU 4-9-1 to test and verify that all 12 VDC sirens
operate. This test will sound the siren for two seconds.
Strobe Test
Use MENU 4-9-2 to test and verify that the strobe operates.
This test will turn on the strobe until you manually stop
the test.
Battery Test
Use MENU 7-9-1 to test the back-up battery that is
connected to the control panel.
Communication Test
Use MENU 5-9-0 to test the telephone reporting capability
of the control panel. You can also activate a communication
test by holding down the Test / Mail key on the keypad.
- Solution 144 1
- TELEPERMIT 2
- CONTENTS 3
- SECTION 5 4
- ACCESS PROGRAMMING 4
- SECTION 6 5
- AREA PROGRAMMING 5
- SECTION 7 6
- INPUT PROGRAMMING 6
- SECTION 8 7
- OUTPUT PROGRAMMING 7
- SECTION 9 9
- COMMS PROGRAMMING 9
- SECTION 10 10
- DEVICE PROGRAMMING 10
- SECTION 11 12
- SYSTEM PROGRAMMING 12
- Overview 15
- Installing the Hardware 17
- Wiring Diagrams 25
- VISION-GRAPhIC 29
- Figure 25: Wiring Diagram 30
- Programming Overview 31
- Programming Overview 33
- = All (No PIN Required) 37
- Access Programming 43
- Press OK to Delete Token 47
- John Smith 47
- Area Programming 55
- Area 1 Name 56
- Area Programming 61
- Input Programming 67
- Input Programming 68
- 00 - No Area 72
- Output Programming 83
- Output Programming 84
- O u t p u t 1 N a m e 86
- 0 0 0 0 0 0 0 0 0 0 0 0 92
- Hour Minute Seconds 10 92
- Comms Programming 99
- Comms Programming 102
- 1 Digits 32 107
- 0 0 0 0 0 0 0 0 111
- Receiver IP 116
- Receiver Port 116
- ACK Wait Time 117
- IP Format 117
- Poll Rate 117
- Retry Count 118
- Encryption Key 118
- Conettix NNC 118
- IP Address 120
- IP RAS Options 121
- RAS Lockout Time 121
- 00 - Log Events Only 0 1 124
- 01 - Dest 1 + Log 124
- 02 - Dest 2 + Log 124
- 03 - Dest 1 & 2 + Log 124
- 04 - Dest 2 If 1 Fails 124
- Device Programming 125
- Device Programming 126
- Security System 130
- DISARMED 130
- Module IP Address 138
- Subnet Mask 138
- Default Gateway 138
- Module MAC Address 138
- Ethernet Options 138
- Solution-144 140
- System Programming 141
- System Programming 142
- Programming Examples 159
- Specifications 163
- Accessories 164
- SECTION 14 165
- Installation Manual Index 166
Related products and manuals for Coffee grinders Bosch 6000
(55 pages)
Coffee grinders Bosch 6000 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 4.044 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals