Bosch 4410L Operations Instructions download pdf (Page 12)

Assembly (continued)

Attaching Miter Lock Knob

Locate the miter gauge lock knob from among the

loose parts, and thread shaft into miter detent assem-

bly as shown in illustration.

Miter Gauge Shaft

Lock Knob

Figure: Miter Lock Knob

Assembling Dust Elbow

And Dust Bag

1. With the miter arm locked in the down position,

push the dust elbow onto the dust port. Push the

dust bag onto the elbow and rotate both to desired

position.

2. Position dust chute/bag so that it does not interfere

with the tool during the cutting operation for all

miter/bevel settings. Make sure dust bag does not

interfere with the slide rails during slide cutting.

3. The dust bag requires emptying when full of

sawdust. Empty it frequently and after completion

of sawing. Carefully remove dust bag from dust

elbow. Empty dust bag in proper trash

bin by unzipping the bag. Be extremely careful of

dust disposed, materials in fine particle form may

be explosive. Do not throw sawdust on an open

fire. Spontaneous combustion, may in time,

result from mixture of oil or water with dust

particles.

NOTE: The dust port accepts the Bosch VACO04

Vacuum Hose Adapter, which allows connection to a

Bosch 35mm vacuum hose.

When sawing chemically pressure

treated lumber, paint that may be

lead based, or any other materials that may contain

carcinogens, use special precautions. A suitable res-

pirator must be worn by all personnel entering the

work area. Work area should be sealed by plastic

sheeting and persons not protected should be kept

out until work area is thoroughly cleaned.

Dust Bag

Dust Elbow

Figure: Dust Elbow and Dust Bag

Dust

Port

12.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 115 116

Comments to this Manuals

No comments

Bosch 4410L Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for Mitre saws Bosch 4410L