Bosch Solution 64 Specifications download pdf (Page 43)

Solution 64

Installer Guide

Input Programming

Bosch Security Systems | 11/05 | BLCC110I

7-3

Press [ON] to arm the zone in Part 2 mode or press [OK] to exit.

Front Door Zn001

Is not armed in PART2

To Enable, Press ON,

To Go Back Press OK

Press [OFF] to disarm the zone in Part 2 mode or press [OK] to

exit.

Main Bedroom Zn002

Is a armed in PART2

To remove, Press OFF

To Go Back Press OK

Zone Default Table

The table below lists the default values for all zone parameters in the Solution 64. By default, zones 5 to 16 are set as Instant zones

and zones 17 to 64 are set as Not Used. Zones marked as Not Used do not require EOL resistors to be tted.

Programming Option Zone 1 Zone 2 Zone 3 Zone 4 Zones 5 to 16 Zones 17 to 64

Zone Name Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 - Zone 16 Zone 17 - Zone 64

Zone Type 1 = Delay 1 5 = Handover 5 = Handover 5 = Handover 3 = Instant 0 = Not Used

Area Assignment 1 1 1 1 1 1

Pulse Count 0 0 0 0 0 0

Pulse Count Time (Sec’s) 120 120 120 120 120 120

Access Group 0 0 0 0 0 0

Report Route 2 2 2 2 2 2

Reporting Options

Lockout Dialler Y Y Y Y Y Y

Report Alarm Y Y Y Y Y Y

Report Alarm Restore Y Y Y Y Y Y

Report Trouble Y Y Y Y Y Y

Report Trouble Restore Y Y Y Y Y Y

Report Bypass Y Y Y Y Y Y

Report Bypass Restore Y Y Y Y Y Y

Delay Report N N N N N N

Zone Options

Lockout Siren Y Y Y Y Y Y

Silent Alarm N N N N N N

Inverted Seal N N N N N N

Bypass Allowed Y Y Y Y Y Y

Sensor Watch N N N N N N

Armed When Part On Y Y Y Y Y Y

Reserved N N N N N N

Test On Exit N Y Y Y Y Y

Table 16: Zone Defaults

Inputs > Commands >

Set Part 2 Zones





MENU 3-0-4

This menu allows you to program which zones are to be

exluded or bypassed when an area has been turned On in Part

Mode 2.

Enter [MENU] + [3] + [0] + [4] and use the up and down arrows

to highlight the area from the list then press [OK].

Use the up and down arrow keys to select the zone(s) that you

want to disable in Part 2, then press [OK]. Alternatively, you

can enter the zone number directly then press [OK]. Zones

marked with a tick are active and will alarm in Part 2 mode.

Zn001 Front Door 

Zn002 Main Bedroom

Zn003 Lounge Window 

Press  OK or MENU

One of the following messages will be displayed depending on

the current zone programming.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 107 108

Comments to this Manuals

No comments

Bosch Solution 64 Specifications Page 43

Comments to this Manuals

Related products and manuals for Power tools Bosch Solution 64