Bosch D9112B Installation Manual download pdf (Page 10)

D9112B | Program Entry Guide | 1.0 Panel Wide Parameter EN | 10

Bosch Security Systems | 2/04 | 74-06145-000-D

Point/User Flag

This program item determines how point and User

ID numbers are presented at the D6500 display,

printer, and computer RS-232 output.

When

Modem Format

is YES, the D9112 sends

expanded Modem II reports to the D6500. If your

central station data files are not set up for D9112

point and User ID number reporting, you can use

this program item to convert these numbers to

D8112 style ZONEX and COMEX reports.

When

Modem Format

is YES, the D9112 sends

expanded Modem II reports to the receiver.

Point/User Flag affects Modem II data as shown in

the following table. The leading zero in the User ID

Number with Point/User Flag programmed NO is

added by the Bosch Security Systems D6500

Receiver.

Default: Yes

Selection: Yes or No

Yes

The D9112 sends a “flag” with each report telling the D6500 to convert D9112 point numbers to

D8112 style ZONEX format and User ID numbers to D8112 style COMEX format. The conversions

are shown in Table 1 and Table 2. [No matter how the D6500 is programmed for output to the

computer system, points and User ID numbers are converted when this item is YES. (See the

D6500:MPU Program Entry Guide, CompOut program item.)]

The D9112 does not send the “flag.” The D6500 outputs point numbers as 001 to 135 (rather than

100 to 815) and User ID numbers as 000 to 099 (rather than 000 to F08), as indicated in Table 1 and

Table 2.

Table 1: Modem II Communication Format Data –

User ID Numbers (Point/User Flag)

No Yes

000 000

001 to 005 001 to 005

006 to 013 601 to 608

014 to 021 701 to 708

022 to 029 801 to 808

030 to 037 B01 to B08

038 to 045 C01 to C08

046 to 053 D01 to D08

054 to 061 E01 to E08

062 to 069 F01 to F08

070 to 099 000

Table 2: Modem II Communication Format Data –

Point Numbers (Point/User Flag)

No Yes

001 to 008 100 to 800

009 to 024 101 to 116

025 to 040 201 to 216

041 to 056 301 to 316

057 to 071 401 to 415

073 to 088 501 to 516

089 to 104 601 to 616

105 to 120 701 to 716

121 to 135 801 to 816

Independent Zone Control Notice:

When using

Independent Zone Controls (I.Z.C.) to send

Opening

Closing

reports by point, do not duplicate

reporting independent point numbers with User ID

reports (see Passcode Worksheet). For example: If an

I.Z.C. is connected to point 8, User ID 8 should not

be used.

D6000: Opening/Closing User ID numbers are

identified at the receiver as "ZONEs" (same

identification as independent points).

User ID 1 = ZONE B

User ID 2 = ZONE C

User ID 3 = ZONE D

User ID 4 = ZONE E

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 95 96

Comments to this Manuals

No comments

Bosch D9112B Installation Manual Page 10

Comments to this Manuals

Related products and manuals for Security access control systems Bosch D9112B