Bosch D9112B Installation Manual Page 86
- Page / 96
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
D9112B | Program Entry Guide | 10.0 Skeds EN | 86
Bosch Security Systems | 2/04 | 74-06145-000-D
Log % Full
Default: Blank
Selection: Blank, 1 to 128, A, B, or C
Enter the number of the relay that activates when
the log has reached the programmed percentage of
its capacity as programmed in RAM Parameters
program item
Log % Full
. This relay provides a
steady output until a “vacuum log” is performed
from the RAM, or the panel is reset.
Summary Fire
Default: Blank
Selection: Blank, 1 to 128, A, B, or C
Enter the number of the relay that activates when a
fire point goes into alarm. This relay provides a
steady output until the alarm is cleared from alarm
memory at the command center.
Summary Alarm
Default: Blank
Selection: Blank, 1 to 128, A, B, or C
Enter the number of the relay that activates when a
controlled point goes into alarm. This relay provides
a steady output until the alarm is cleared from alarm
memory at the command center.
Summary Fire Tbl
Default: Blank
Selection: Blank, 1 to 128, A, B, or C
Activates when any fire point in the panel is in
trouble. This relay provides a steady output until the
trouble is cleared from alarm memory at the
command center.
Summary Trouble
Default: Blank
Selection: Blank, 1 to 128, A, B, or C
Activates when any on-fire point in the panel is in
trouble. This relay provides a steady output until the
trouble is cleared from alarm memory at the
command center.
10.0 Skeds
Use the Skeds module to program the D9112 to
automatically execute functions on a specific date or
day of the week. You can program up to seventeen
Skeds in the D9112.
Each Sked can be programmed with one of fifteen
functions. Some functions codes require that you
enter additional parameters. The functions and their
associated parameters are listed in the “Sked
Function Code Table” in the Program Record Sheet,
and they are explained in detail following the
S##
Function Code
prompt.
Each Sked can be programmed with up to four
Holiday Indexes. The Holiday Indexes can be used
to execute the Sked on the holidays in the addition
to the Date or Day(s) of the week, or they can be
used to prevent the Sked from executing on the
holidays (see
S## Xept Holiday
).
Sked Number
Default: 1
Selection: 1 to 17
Enter the number of the Sked you are programming.
- Control Panel 1
- About this Guide 2
- Other Lettering Conventions 2
- Used in this Manual 2
- Table of Contents 3
- Table of Tables 7
- 1.0 Panel Wide Parameter 8
- Point/User Flag 9
- A# Acct O/C 9
- A# Area O/C 9
- P### BFSK/Relay 9
- Modem Format 10
- Default: 11
- 1.2 Phone Routing 12
- 1.3 Power Supervision 19
- 1.4 Printer Parameters 20
- PRT Non Alrm 21
- SDI Fail 21
- Diagnostic 21
- Expanded Test 21
- 1.5 RAM Parameters 22
- Log % Full 24
- RAM Call 24
- Bad Call to RAM 24
- 2.0 Area Wide Parameters 25
- 2.2 Bell Parameters 27
- 2.3 Opening and Closing 29
- 2.4 O/C Windows 35
- Xept Holiday 39
- W## Xept Holiday 39
- 2.5 Command Center 42
- CF# Text 44
- CF# Key Stroke 44
- Program Record Sheet 44
- 3.0 User Interface 45
- 3.3 Cmd Center Function 46
- 3.4 Authority Lvl Assign 46
- Point Type 51
- Perimeter O/C 51
- Perimeter 51
- Closing Options 60
- 4.0 Command Menu 62
- 5.0 User Access Windows 64
- Windows 65
- 6.0 Passcode Worksheet 66
- Usr Code Tamper 67
- 7.0 Point Index 69
- Response 70
- Point Response 70
- P## Entry Delay 70
- 72
- A# Burg Time 74
- Fire Point 74
- 1. Program point 75
- 2. Choose a 75
- 3. Enable and/or disable 75
- 8.0 Point Assignments 79
- 8.2 Command 9 80
- 8.3 Command 7 81
- 9.0 Relay Parameters 82
- 9.1 Area Wide Relays 83
- 9.2 Panel Wide Relays 85
- 10.0 Skeds 86
- S## Area 1 87
- Bypassable 88
- Unbypass Point 88
- Unbypass All 88
- S## Defer Test 90
- S## Hourly Report 90
- S## Defer Status 90
- S## Cmd Center 91
- S## Custom Func 91
- 11.0 Holiday Indexes 94
- 11.2 View Holidays 95
- Bosch Security Systems 96
- 130 Perinton Parkway 96
- Fairport, NY 14450-9199 96
Related products and manuals for Security access control systems Bosch D9112B
(5 pages)
(8 pages)
(2 pages)
(12 pages)
(122 pages)© 2020, manymanuals.com. All rights reserved. | 2.127 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals