SERVICE AND SPARES
6 720 644 743b (2011/08)
48
BURNER REMOVAL
Refer to figure 83
1. Remove clamping plate.
2. Remove spark/flame electrode assembly and seal
from the top of the heat exchanger.
3. Remove burner.
Fig. 83 Burner removal
Checking and cleaning the electrode assembly:
B Inspect the condition of the electrodes and ceramics,
replace if necessary.
B Use a plastic scouring pad to clean the electrodes.
BAFFLE REMOVAL
Refer to figure 84.
1. Remove top baffle.
2. Remove lower baffle.
Fig. 84 Baffle removal
NOTICE: Cleaning
B Do not use wire wool to clean the
electrodes
1.
2.
3.
6720643895-61.1Wo
If the lower baffle is stuck, it may be
necessary to use the “Baffle removal tool”
from the heat exchanger cleaning kit
- 7 716 192 312, as shown in figure 84.
6720643895-64.1Wo
1.
2.
Comments to this Manuals