Bosch NEI-Series User Manual download pdf (Page 22)

22 en | Installation Dinion IP Infrared Imager

F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.

4 Installation

4.1 Overview of Installation Steps

Follow these steps in sequence to mount the camera to a wall:

1. Mount the junction box. See Section 4.2 Mount the

Junction Box, page 23.

2. Route wires and attach connectors for power, telemetry,

and video. See Section 4.3 Route Wires and Attach

Connectors, page 24.

3. Attach pendant arm to junction box. See

Section 4.4 Attach Pendant Arm to Junction Box, page 27.

CAUTION!

Installation must be made by qualified service personnel and

must conform to the National Electrical Code and all applicable

local codes.

WARNING!

IMPORTANT MOUNTING INSTRUCTIONS

The camera must be attached securely to the wall in

accordance with these installation instructions. Failure to

follow installation instructions may result in injury or death.

The camera has been evaluated for wall mounting, through the

mounting holes in the junction box, using the following

hardware secured into a 2 x 4 stud under 1/2 in. drywall:

– Four (4) Lag bolts, 1/4-9 x 2 (M7-0.35 x 50) with 1/2 in.

head

– Four (4) 12 mm (1/2 in.) flat washers

The camera has not been evaluated for safety requirements

using other mounting kits.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 123 124

No comments

Bosch NEI-Series User Manual Page 22