Bosch NEI-Series User Manual download pdf (Page 60)

60 en | Configuration via IP, Advanced Mode Dinion IP Infrared Imager

F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.

Intensity level

Adjusts the intensity of the illuminator light (0 to 30); 30 is the

default.

9.3.6 Picture Settings: Enhance

Dynamic engine

Select from Off, XF Dynamic, 2x Dynamic, or Smart BLC.

Auto black

Auto black ON automatically increases the visibility of details.

Sharpness

Adjusts the black level (-15 to 0 to +15). Zero is the factory

default.

Dynamic noise reduction

In AUTO mode, the camera automatically reduces the noise in

the picture. This may cause some motion blur on moving

objects.

Peak white

Select On to activate peak white invert. Select Off to deactivate

it.

9.3.7 Picture Settings: Color

White balance

– ATW - Auto tracking white balance allows the camera to

adjust constantly for optimal color reproduction.

– AWB hold - Puts the ATW on hold and saves the color

settings.

– In Manual mode, the Red, Green, and Blue gain can be set

manually to a desired position.

Speed

This option is available only for ATW white balance. Adjust the

speed (Fast, Medium, Slow) of the white balance control loop.

R-gain

Offsets factory white point alignment (reducing red introduces

more cyan) (-50 to 0 to +50).

G-gain

ATW mode and AWB hold mode: adjusts the Green gain (-50 to

0 to +50) to optimize the white point.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 123 124

No comments

Bosch NEI-Series User Manual Page 60