Bosch NEI-Series User Manual download pdf (Page 28)

28 en | Ethernet Connection (IP models) Dinion IP Infrared Imager

F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.

5 Ethernet Connection (IP models)

5.1 About the Ethernet Connection

The NEI-30 transmits video and control over a standard TCP/IP

network using the built-in web server through which users can

configure the display settings and the operating settings of the

camera, and the parameters of the network to which the

camera is connected. The NEI-30 connects to a 10 BASE-T/100

BASE-TX network either directly or via a hub. In addition, power

can be supplied to IP camera models via the Ethernet cable

compliant with Power-over-Ethernet Plus (PoE+) (IEEE 802.3at

standard).

5.2 Connecting the NEI-30 to the PC

1. Install the NEI-30 according to the instructions.

2. Make the desired connection between the Ethernet cable

and the camera.

– Option A: Connect the RJ45 connector on the camera

to a dedicated network switch to bypass the Local

Area Network (LAN), and then connect the dedicated

network switch to the RJ45 connector on the PC.

– Option B: Connect the RJ45 connector on the camera

directly to the PC.

CAUTION!

Make Ethernet connections (Cat-5e or Cat-6; maximum

distance 100 m (328 ft) ) to non-exposed (indoor) networks

only.

WARNING!

IP camera models can accept power from the 12 VDC / 24 VAC

power input or from the Ethernet input. Ensure that the camera

receives power from only one source.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 123 124

No comments

Bosch NEI-Series User Manual Page 28