Bosch NEI-Series User Manual download pdf (Page 59)

Dinion IP Infrared Imager Configuration via IP, Advanced Mode | en 59

Bosch Security Systems, Inc. User Manual F.01U.263.416 | 3.1 | 2012.09

Switch level

Set the video Switch level at which the camera switches to

monochrome operation (-15 to 0 to +15). A low (negative) value

means that the camera switches to? monochrome at a lower

light (lux) level. A high (positive) value means that the camera

switches to monochrome at a higher light (lux) level.

If you select Auto Photocell switching mode, the camera

automatically switches the filter depending on the ambient light

level. The switching level is programmable by adjusting the

switch level.

Priority

In Auto Video switching mode, set the camera priority:

– Motion - The camera gives sharp images without motion

blur as long as the light level permits.

– Color - The camera gives color pictures as long as the light

level permits.

The camera recognizes IR-illuminated scenes to prevent

unwanted switching to color mode.

IR contrast

There are two modes for IR contrast:

– Enhanced - The camera optimizes contrast in applications

with high IR illumination levels.

– Normal - The camera optimizes contrast in mono

applications with visible light illumination.

Color burst

Select On to activate color burst. Select Off to deactivate it.

9.3.5 Picture Settings: Iluminator

IR function

– On - The illuminator is always on, regardless of the level of

ambient light.

– Off - The illuminator remains off, regardless of the level of

ambient light.

– Auto - The camera switches the illuminator’s cut-off filter

on and off depending on the Day/Night mode.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 123 124

No comments

Bosch NEI-Series User Manual Page 59