Bosch NEI-Series User Manual download pdf (Page 76)

76 en | Configuration via IP, Advanced Mode Dinion IP Infrared Imager

F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.

If the unit is operated behind a firewall, TCP (HTTP port)

should be selected as the transfer protocol. For use in a local

network, select UDP.

Stream

Select the stream for transmission in case of an alarm.

Remote port

Depending on the network configuration, select a browser port

here. The ports for HTTPS connections will be available only if

the On option is selected in the SSL encryption parameter.

Decoder

Select a decoder of the receiver to display the alarm image. The

decoder selected has an impact on the position of the image in

a split screen. For example, you can specify via a VIP XD that

the upper-right quadrant should be used to display the alarm

image by selecting decoder 2.

SSL encryption

The data for the connection, for example the password, can be

securely transmitted with SSL encryption. If you have selected

the On option, only encrypted ports are offered in the Remote

port parameter.

You can activate and configure encryption of the media data

(video and metadata) on the Encryption page (see

Section 9.7.5 Encryption, page 95).

Auto-connect

CAUTION!

Please note that in some circumstances, a larger bandwidth

must be available on the network for additional video images in

the event of an alarm, in case Multicast operation is not

possible. To enable Multicast operation, select the UDP option

for the Video transmission parameter here and on the Network

page (see Page 87).

NOTICE!

Please note that the SSL encryption must be activated and

configured at both ends of a connection. This requires the

appropriate certificates to be uploaded onto the camera.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 123 124

No comments

Bosch NEI-Series User Manual Page 76