Bosch D9412GV4 Installation Guide download pdf (Page 123)

D9412GV4/D7412GV4/D7212GV4 Panel and Area Wide Parameters | en 123

Bosch Security Systems, Inc. Program Entry Guide F.01U.218.312 | 04 | 2012.03

When it reaches 100% capacity (memory logger is full and previously stored events will be

overwritten), the control panel generates a local LOG OVERFLOW event. The control panel

does not call RPS again until it downloads the log and the Log % Full percentage is again

reached. These events are also sent to the control panel's event log and to the local printer(s)

if installed.

Summary Fire

Enter the number of the relay that activates when any Fire point in the system (P## Type 0,

P## Fire Yes) enters into alarm. This relay provides a steady output until all Fire points in the

system return to normal. Refer to Section Fire Summary Sustain, page 175 for details on

alternate operation.

Summary Alarm

Enter the number of the relay that activates when a Non-fire point enters into alarm. This relay

provides a steady output until the alarm is acknowledged by a valid passcode, then cleared

from alarm memory with an acknowledgment at the keypad.

Summary Fire Trouble

Activates when any Fire point in the control panel is in trouble, or if a Fire Supervision point is

missing. This relay provides a steady output until all Fire points restore to a normal condition.

Summary Supervisory Fire

Activates when any Fire Supervisory point in the control panel is in a supervisory condition

(off-normal). This relay provides a steady output until all Fire Supervisory points are restored

to a normal condition.

Summary Trouble

Default: 0

Selection: 0, 1 to 128 A, B, or C for D9412GV4

0, 1 to 64, A, B, C for D7412GV4