Bosch D9412GV4 Installation Guide download pdf (Page 148)

148 en | Points D9412GV4/D7412GV4/D7212GV4

F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.

P### Debounce

The debounce count is the number of times the control panel scans a point before generating

an alarm. Scan cycles are 300 ms.

For appropriate settings consult the manufacturer’s instructions for the device connected to

this point.

P### Relay Codes/Relays

Use this option to activate a relay when the point is faulted. Refer to Table 5.2.

Default: 2

Selection: 1 to 15

1 .300 sec

2 .600 sec

3 .900 sec

4 1.2 sec

5 1.5 sec

6 1.8 sec

7 2.1 sec

8 2.4 sec

9 2.7 sec

10 3.0 sec

11 3.3 sec

12 3.6 sec

13 3.9 sec

14 4.2 sec

15 4.5 sec

NOTICE!

Use an entry of two or higher. Interior Follower points need a Debounce value of at least

three.

NOTICE!

Door points assigned to D9210C modules need a Debounce value of at least four (D9412GV4

and D7412GV4).

NOTICE!

P### debounce does not apply to wireless points.

Default: Points 1..8 are set to Relay Codes 1..8 respectively

All other points are 0.

Selection: 0: Disabled

1 to 8

NOTICE!

Relays do not activate for Fire Supervisory or Non-Fire Supervisory points.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 209 210

No comments

Bosch D9412GV4 Installation Guide Page 148